MULTI-FUEL BIOMASS STEEL BOILER
BIOCOMPACT
200 – 250 – 300 – 350 – 400 – 500 – 650 – 800 – 1000 – 1250 – 1500 – 1750 – 2000 – 2500 – 3000 – 4000 – 5000 kW
FEATURES:
Steel boiler, easy, simple operation, with 3 horizontal smoke passages, manual heat exchanger cleaning and ash collection.
Consists of 3 parts:
- Plinth (boiler base) with bottom-up burner.
- Combustion chamber + heat exchanger.
- Injector with fuel hopper.
Maximum service pressure:
- Standard: 3 bar.
- For other pressures, consult.
Bottom-up, biomass burner built of high quality stainless steel and cast iron.
- Fuel injector with active and passive systems to prevent flashback; it has a fuel level control in the injector jump by means of a capacitive probe.
- Control: For all boiler functions, including stop-start programming and display of all operating parameters..
- Proportional control according to power demanded.
- Large combustion chamber and heat exchanger doors that facilitate cleaning and maintenance.
- For biomass fuels such as pellets, almond shells, olive pits.
- There is also a BIOCOMPACT wood chip version.
Sliding door adjustment system.
BIOCOMPACT 1000
Anti-deflagration valve.
BIOCOMPACT 1000
BIOCOMPACT 1000
OPTIONS
Simple frame (standard)
Boiler components
- Primary and secondary turbines.
- Burner auger and hopper auger.
- Ash collection.
- Semi-automatic ignition.
External components
- Primary pump control (NO power).
Temperatures
- – Smoke.
- – Boiler.
- – Buffer tank.
Safety devices
- Thermostat.
- Flow switch.
Control options
- External start: Via a potential-free contact.
- Boiler Ok: Potential-free contact indicates if there is an alarm in the boiler.
Ash compactor
Can be installed on all models, either on the right or left side.
Panel with autonomous cyclone control
Same as a simple box (standard) plus the following:
- Boiler components.
- Cyclone with extractor that self-regulates the depression in the boiler through a PID system.
Semi-automatic ignition
Optionally, it can be installed in all the BIOCOMBY models.
Cyclone + Extractor
Can be installed in all BIOCOMBY models. It regulates the depression through the PID system and needs a panel with autonomous cyclone control.
PLC panel
Boiler components
- Primary, secondary turbines and rack.
- Burner auger and hopper auger.
- Ash collection.
- Semi-automatic ignition.
- Fuel transport to fill the boiler hopper.
- Cyclone with extractor that self-regulates the depression in the boiler via a PID system.
External components
- Primary pump control (NO power).
- Anti-condensation pump control (NO power).
- Cooling pump control (NO power).
Temperatures
- – Smoke.
- – Boiler output.
- – Boiler return.
- – Buffer tank.
Safety devices
- Thermostat.
- Flow switch.
- Klixon flame return circuit breaker.
- Emergency stop button.
Control options
- External start: Via a potential-free contact.
- External thermostat: Via a potential-free contact.
- Boiler Ok: Potential-free contact indicates if there is an alarm in the boiler.
CONTAINER BOILERS AND CUSTOM DESIGNS FOR SPECIAL FUELS
Modular systems for domestic hot water and heating, with easy access for maintenance and cleaning.
This compact, autonomous system incorporates all components and can be installed in any type of building or existing installation, such as homes, hotels, rural houses, campsites, farms, sports centres and industrial plants.
We can design all hydraulic schemes:
- Heating only.
- Heating + AC.
- Heating + DHW + Buffer tank, etc.
We can study the feasibility of using different fuel proposals.
SILOS AND FUEL TRANSPORT
Metal or fabric silos installed outdoors, for the following fuels:
- Pellet.
- Shells.
- Olive pits.
Our technical office will study each case and provide the best solution according to the type of installation and fuel used.
Flexible transport by augers.
Shaker.
Shaker.
Shaker with lifting system.
Shaker with metal silo and lift loading system.
Shaker with metal silo and lift loading system.
Double silo with lifting system.