MULTI-FUEL BIOMASS STEEL BOILER, BY COMPONENTS

BIOMODULAR

180 – 265 – 350 – 435 – 520 kW

DOWNLOAD CATALOGUE

FEATURES:

Steel boiler divided into components to make it easier to install in places of difficult access. 

3 smoke passages. Easy and simple operation for biomass fuels (e.g. pellets, olive pits or almond shells)

– Optional semi-automatic ignition.
– Manual cleaning system.
– Optional semi-automatic ash collection.
– Pump control.
– Anti-explosion system.

Consists of: 

  • A plinth (boiler base) with bottom-up burner.
  • 3 or more modules depending on the power.
  • Fuel supply, through 2 independent motors.
  • 3 horizontal smoke passages.
  • Manual heat exchanger cleaning.

Form of supply: 

  • Burner in individual packaging.
  • Frame in individual packaging.
  • Injector in individual packaging.
  • Hopper in individual packaging.

Service pressure:

  • 5 bar.
  • Others: Consult.

Cast iron, bottom-up burner.

Fuel injector:

Active and passive system to prevent flame return, with a fuel jump.

Regulation:

Control: For all boiler functions, including stop-start programming and display of all operating parameters.

1 – Plinth with burner.

2 – Rear component installation.

3 – Intermediate component installation.

4 – Second intermediate component installation.

5 – Front component installation.

6 – Assembly of insulation and enclosures.

Hopper location options with front burner:

OPTIONS

Simple frame (standard)

Boiler components

  • Primary and secondary turbines.
  • Burner auger and hopper auger.
  • Ash collection.
  • Semi-automatic ignition.

External components

  • Primary pump control (NO power).

Temperatures

  • – Smoke.
  • – Boiler.
  • – Buffer tank.

Safety devices

  • Thermostat.
  • Flow switch.

Control options

  • External start: Via a potential-free contact.
  • Boiler Ok: Potential-free contact indicates if there is an alarm in the boiler.

Ash compactor

Can be installed on all models, either on the right or left side.

Panel with autonomous cyclone control

Same as a simple box (standard) plus the following:

  • Boiler components.
  • Cyclone with extractor that self-regulates the depression in the boiler through a PID system.

Semi-automatic ignition

Optionally, it can be installed in all the BIOCOMBY models.

Cyclone + Extractor

Can be installed in all BIOCOMBY models. It regulates the depression through the PID system and needs a panel with autonomous cyclone control.

PLC panel

Boiler components

  • Primary, secondary turbines and rack.
  • Burner auger and hopper auger.
  • Ash collection.
  • Semi-automatic ignition.
  • Fuel transport to fill the boiler hopper.
  • Cyclone with extractor that self-regulates the depression in the boiler via a PID system.

External components

  • Primary pump control (NO power).
  • Anti-condensation pump control (NO power).
  • Cooling pump control (NO power).

Temperatures

  • – Smoke.
  • – Boiler output.
  • – Boiler return.
  • – Buffer tank.

Safety devices

  • Thermostat.
  • Flow switch.
  • Klixon flame return circuit breaker.
  • Emergency stop button.

Control options

  • External start: Via a potential-free contact.
  • External thermostat: Via a potential-free contact.
  • Boiler Ok: Potential-free contact indicates if there is an alarm in the boiler.