BUFFER TANKS

INERPLUS ACS

From 300 to 1000 LITRES

Steel buffer tanks for closed heat circuits, with an AISI 316L stainless steel corrugated coil of large heat exchange surface area to produce DHW instantly.
Requires the installation of a thermostatic valve at the DHW outlet for a comfortable temperature.
5 connections for inputs and outputs and 3 entries at different heights for temperature probes.
Rigid insulation, 75 to 125 mm thick, depending on the model. Exterior lined with heat resistant synthetic fabric in stainless steel colour.
Maximum working pressure 3 bar.
Entries lead inside to improve layering.

INERPLUS ACS 300

STEEL BUFFER TANK
300 LITRES;
DIAMETER: 670 mm;
HEIGHT: 1595 mm;
WEIGHT: 76 kg;
INLET AND OUTLET: G 1 1/2″ H;
COIL: G 1″ H;
ENERGY EFFICIENCY CLASS: B

INERPLUS ACS 500

STEEL BUFFER TANK
500 LITRES;
DIAMETER: 800 mm;
HEIGHT: 1765 mm;
WEIGHT: 123 kg;
INLET AND OUTLET: G 2″ H; COIL: G 1″ H;
ENERGY EFFICIENCY CLASS: B

INERPLUS ACS 750

STEEL BUFFER TANK
750 LITRES;
DIAMETER: 1010 mm;
HEIGHT: 1665 mm;
WEIGHT: 208 kg;
INLET AND OUTLET: G 2″ H;
COIL: G 1″ H;
ENERGY EFFICIENCY CLASS: B

INERPLUS ACS 1000

STEEL BUFFER TANK
1000 LITRES;
DIAMETER: 1010 mm;
HEIGHT: 2000 mm;
WEIGHT: 218 kg;
INLET AND OUTLET: G 2″ H;
COIL: G 1″ H;
ENERGY EFFICIENCY CLASS: –

DOWNLOADS:

Catalogue

Inerplus ACS manual

Energy efficiency label

Declaration of conformity

INERPLUS ACS Section

FOR BIOMASS BOILERS

To choose the appropriate buffer tank for your installation, you can use the following calculation:
5 to 10 litres per kW boiler power.

Example for BIOSELECT 30:

– Minimum: INERPLUS 200
– Intermediate: INERPLUS 300
– Maximum: INERPLUS 500

FOR SOLIDS WOOD-FIRED BOILERS

To choose the right buffer tank for your installation, use the following calculation:
5 to 10 litres per m2 of dwelling surface area.

For example, for a dwelling of 100 m2 surface area:

– Minimum: INERPLUS 500
– Intermediate: INERPLUS 750
– Maximum: INERPLUS 1000