BUFFER TANKS

INERPLUS

From 200 to 1000 LITRES

  • Steel buffer tanks for closed heat circuits.
  • 5 connections for inputs and outputs and 3 entries at different heights for temperature probes.
  • Rigid insulation, 75 to 125 mm thick, depending on the model. Exterior lined with heat resistant synthetic fabric in stainless steel colour.
  • Maximum working pressure 3 bar.
  • Entries lead inside to improve layering.
INERPLUS 200
STEEL BUFFER TANK
200 LITRES;
DIAMETER: 600 mm;
HEIGHT: 1430 mm;
WEIGHT: 53 kg;
INLET: G 1 1/2″ H;
OUTLET: G 1 1/2″ H;
ENERGY EFFICIENCY CLASS: B
INERPLUS 300
STEEL BUFFER TANK
300 LITRES;
DIAMETER: 670 mm;
HEIGHT: 1605 mm;
WEIGHT: 64 kg;
INLET: G 1 1/2″ H;
OUTLET: G 1 1/2″ H;
ENERGY EFFICIENCY CLASS: B
INERPLUS 500
STEEL BUFFER TANK
500 LITRES;
DIAMETER: 800 mm;
HEIGHT: 1765 mm;
WEIGHT: 112 kg;
INLET: G 2″ H;
OUTLET: G 2″ H;
ENERGY EFFICIENCY CLASS: B
INERPLUS 750
STEEL BUFFER TANK
750 LITRES;
DIAMETER: 1010 mm;
HEIGHT: 1665 mm;
WEIGHT: 155 kg;
INLET: G 2″ H;
OUTLET: G 2″ H
INERPLUS 1000
STEEL BUFFER TANK
1000 LITRES;
DIAMETER: 1010 mm;
HEIGHT: 2000 mm;
WEIGHT: 160 kg;
INLET: G 2″ H;
OUTLET: G 2″ H

INERPLUS section

FOR BIOMASS BOILERS

To choose the appropriate buffer tank for your installation, you can use the following calculation:
5 to 10 litres per kW boiler power.

For example, for the BIOSELECT 30:

– Minimum: INERPLUS 200
– Intermediate: INERPLUS 300
– Maximum: INERPLUS 500

FOR SOLIDS WOOD-FIRED BOILERS

To choose the right buffer tank for your installation, use the following calculation:
5 to 10 litres per m2 of dwelling surface area.

For example, for a dwelling of 100 m2 surface area:

– Minimum: INERPLUS 500
– Intermediate: INERPLUS 750
– Maximum: INERPLUS 1000